Tekno RC EB410 / ET410 Adjustable Ackermann Front Spindles (L/R)

These new spindles allow less overall Ackermann than is possible by moving the steering link on the bell cranks. They are a direct replacement for TKR6553 and are compatible with all stub axles, universals, and spindle carriers for the EB410 and ET410 vehicles. Spindle Arms and M3x10 screws are not included.

Setup Notes:
With these spindles, you can use the spindle arms listed below to further adjust the steering Ackermann. TKR6669D has the most Ackermann and TKR6669A has the least. Our old spindles TKR6553 have even more Ackerman than TKR6669D. More Ackermann provides quicker initial steering response, more initial steering, and is better suited for small tracks with tight corners. Less Ackermann has smoother initial steering response, more mid and exit steering, and typically works well for larger tracks with flowing corners.

Requirements:
4ea M3x10 Button Head Screws (TKR1403)
And at least one of the following:
TKR6669A – Spindle Arms (L/R, EB/ET410, requires TKR6553X, Type A)
TKR6669B – Spindle Arms (L/R, EB/ET410, requires TKR6553X, Type B)
TKR6669C – Spindle Arms (L/R, EB/ET410, requires TKR6553X, Type C)
TKR6669D – Spindle Arms (L/R, EB/ET410, requires TKR6553X, Type D)